High Current Power Supplies

Bruker high current power supplies are employed in industry and particle physics research worldwide. Our high current power supplies, available for pulsed or DC, monopolar, bipolar or four-quadrant operation, deliver high currents of up to 30.000 A. Based on the latest switch mode technology they ensure optimum efficiency and enable standalone, failsafe operation.

: 20000A High Current Power Supply

The option of a linear mode regulation provides maximum stability and minimum noise and fluctuations from 1% to better than 1 ppm (part per million). For high power applications, the high current power supplies benefit from SCR (Thyristor)
control. We offer single- and multi channel supplies starting in the 100 Watt range going up to several Megawatts.

For room Temperature Electromagnets, resistive magnet coils
For Superconducting magnets
For any other resistive or capacitve load
Pulsed or DC opereration, monopolar or true bipolar with smooth zero-crossing
DC output power : 0.1kVA to 3000 kVA
Output current : 1A to 30000A
Current stability ranging from 1% to <1ppm
Switch mode, Thyristor or transistor series regulation technologies available

Technical Information

Switch mode technologies: 6-, 12- or 24 pulses.
Primary or secondary switching, resonant or hard switching
Linear technology with or without pre regulation (auto transformer, switch mode or thyristors)
Thyristor controlled only, 6-, 12- or 24 pulse rectifier
Computer control: DACs and ADCs of 16, 18 or 20 bit
Interfaces: RS232, RS422, RS485, IEEE488/GPIB, CANbus, Profibus DP, InterbusS, Ethernet-TCP/IP, others on request
Load: resistive, inductive, capacitive or superconducting
Mode of operation: DC, ramped or pulsed
Output power: 0.1kW to 3.000 kW
Output current: 1A to 30.000 A
Stability

short term:% to < 0.1ppm/30 min
long term: % to < 1ppm

Polarity: mono polar,polarity reversal switch, 2-or 4-quadrant true bipolar operation

For more information, please contact us.