PicoIndenter Publications Banner 1154x400px

PI Series SEM PicoIndenter Publications - 2017

Dual-phase nanostructuring as a route to high-strength magnesium alloys
Ge Wu, Ka-Cheung Chan, Linli Zhu, Ligang Sun, Jian Lu
Nature, 545 (2017): 80-83

In-situ micro-cantilever bending test in environmental scanning electron microscope: Real time observation of hydrogen enhanced cracking
Y. Deng, T. Hajilou, D. Wan, N. Kheradmand, A. Barnoush
Scripta Materialia, 127 (2017): 19-23

Size effect and scaling power-law for superelasticity in shape-memory alloys at the nanoscale
Jose F. Gómez-Cortés, Maria L. Nó, Iñaki López-Ferreño, Jesus Hernández-Saz, Sergio I. Molina, Andrey Chuvilin, Jose M. San Juan

Deformation Mechanisms Map of Cu/Nb Nanoscale Metallic Multilayers as a Function of Temperature and Layer Thickness
J. Snel, M. A. Monclús, M. Castillo-Rodríguez, N. Mara, I. J. Beyerlein, J. Llorca, J. M. Molia-Aldareguía
JOM, 69.11 (2017): 2214-2226

Nanoindentation and in situ microcompression in different dose regimes of proton beam irradiated 304 SS
A. Reichardt, A. Lupinacci, D. Frazer, N. Bailey, H. Vo, C. Howard, Z. Jiao, A.M. Minor, P. Chou, P. Hosemann
Journal of Nuclear Materials, 486 (2017): 323-331

Single-shot full strain tensor determination with microbeam X-ray Laue diffraction and a two-dimensional energy-dispersive detector
A. Abboud, C. Kirchlechner, J. Keckes, T. Conka Nurdan, S. Send, J. S. Micha, O. Ulrich, R. Hartmann, L. Strüder, U. Pietsch
Journal of Applied Crystallography, 50 (2017): 901-908

Micro-mechanical evaluation of SiC-SiC composite interphase properties and debond mechanisms
J. Kabel, Y. Yang, M. Balooch, C. Howard, T. Koyanagi, K.A. Terrani, Y. Katoh, P. Hosemann
Composites Part B: Engineering, 131 (2017): 173-183

Fracture mechanical testing of single crystal notched α-iron micro-cantilevers
B.D. Snartland, A.B. Hagen, C. Thaulow
Engineering Fracture Mechanics, 175 (2017): 312-323

Modulation of plastic flow in metallic glasses via nanoscale networks of chemical heterogeneities
Jinwoo Kim, Hyun Seok Oh, Wan Kim, Pyuck-Pa Choi, Dierk Raabe, Eun Soo Park
Acta Materialia, 140 (2017): 116-129

Dominating deformation mechanisms in ultrafine-grained chromium across length scales and temperatures
R. Fritz, D. Wimler, A. Leitner, V. Maier-Kiener, D. Kiener
Acta Materialia, 140 (2017): 176-187

Micromechanical behavior of single-crystalline Cu6Sn5 by picoindentation
J. J. Yu, J. Y. Wu, L. J. Yu, H. W. Yang, C. R. Kao
Journal of Materials Science, 52.12 (2017): 7166-7174

Uniaxial fracture test of freestanding pristine graphene using in situ tensile testing under scanning electron microscope
Bongkyun Jang, Alexander E. Mag-isa, Jae-Hyun Kim, Byungwoon Kim, Hak-Joo Lee, Chung-Seog Oh, Takashi Sumigawa, Takayuki Kitamura
Extreme Mechanics Letters, 14 (2017) 10-15

Temperature and orientation effects on the deformation mechanisms of α-Fe micropillars
A.B. Hagen, B.D. Snartland, C. Thaulow
Acta Materialia, 129 (2017): 398-407

Effect of crystallographic orientation on nanomechanical modelling of an iron single crystal cracked cantilever beam
Jørn Skogsrud, Christian Thaulow
Materials Science and Engineering: A, 684 (2017): 274-283

Size effect of deformation twinning in face-centred cubic single crystals: Experiments and modelling
Z.Y. Liang, J.T.M. De Hosson, M.X. Huang
Acta Materialia, 139 (2017): 1-10

Selective interface toughness measurements of layered thin films
R. Konetschnik, R. Daniel, R. Brunner, D. Kiener
AIP Advances, 7 (2017)

Nanolaminate of metallic glass and graphene with enhanced elastic modulus, strength, and ductility in tension
Sun-Young Park, Eun-Ji Gwak, Ming Huang, Rodney S. Ruoff, Ju-Young, Kim
Scripta Materialia, 139 (2017): 63-66

Microstructure and mechanical properties of Zr-Ti-Cu-Nd metallic glass composites
Y.H. Wu, C. Wang, C.H. Hsueh, T.H. Li, C.H. Chang, H.C. Chen, J.S.C. Jang, J.C. Huang, Z.H. Ma
Journal of Alloys and Compounds, 702 (2017): 318-326

Microstructures and Mechanical Properties of as-Drawn and Laboratory Annealed Pearlitic Steel Wires
A. Durgaprasad, S. Giri, S. Lenda, S. Kundu, S. Mishra, S. Chandra, R. D. Doherty, I. Samajdar
Metallurgical and Materials Transactions A, 48.10 (2017)L 4583-4597

Fabrication and in situ compression testing of Mg micropillars with a nontrivial cross section: Influence of micropillar geometry on mechanical properties
Jiří Bočan, Sadahiro Tsurekawa, Aleš Jäger
Materials Science and Engineering: A, 687 (2017): 337-342

Probing the mechanical properties of carbon nanohorns subjected to uniaxial compression and hydrostatic pressure
Yanli Nan, Bo Li, Xiang Zhao, Xiaolong Song, Lei Su
Carbon, 125 (2017): 236-244

Helium Nanobubbles Enhance Superelasticity and Retard Shear Localization in Small-Volume Shape Memory Alloy
Wei-Zhong Han, Jian Zhang, Ming-Shuai Ding, Lan Lv, Wen-Hong Wang, Guang-Heng Wu, Zhi-Wei Shan, Ju Li
Nano Letters, 17.6 (2017): 3725-3730

Ultralight and resilient Al2O3 nanotube aerogels with low thermal conductivity
Chencheng Xu, Haolun Wang, Jianan Song, Xiaopeng Bai, Zhenglian Liu, Minghao Fang, Yongshuai Yuan, Junyuan Sheng, Xiaoyan Li, Ning Wang, Hui Wu
Journal of the American Ceramic Society, 101.4 (2017): 1677-1683

Micromechanical behavior of single crystalline Ni3Sn4 in micro joints for chip-stacking applications
L.J. Yu, H.W. Yen, J.Y. Wu, J.J. Yu, C.R. Kao
Materials Science and Engineering: A, 685 (2017): 123-130

Uniaxial fracture test of freestanding pristine graphene using in situ tensile under scanning electron microscope
Bongkyun Jang, Alexander E. Mag-isa, Jae-Hyun Kim, Byungwoon Kim, Hak-Joo Lee, Chung-Seog Oh, Takashi Sumigawa, Takayuki Kitamura
Extreme Mechanics Letters, 14 (2017): 10-15

Asynchronous cracking with dissimilar paths in multilayer graphene
Nanoscale, 44 (2017)

Fracture toughness and structural evolution in the TiAlN system upon annealing
M. Barosik, C. Rumeau. R. Hahn, Z.L. Zhang, P.H. Mayrhofer
Scientific Reports, 7 (2017)

Structural Reinforcement through Liquid Encapsulation
Alin Cristain Chipara, Peter Samora Owuor, Sanjit Bhowmick, Gustavo Brunetto, S.A. Syed Asif, Mircea Chipara, Robert Vajtai, Jun Luo, Douglas S. Galvao, Chandra Sekhar Tiwary, Pulickel M. Ajayan
Advanced Materials Interfaces, 4.2 (2017)

Pore and ligament size control, thermal stability and mechanical properties of nanoporous single crystals of gold
Maria Koifman Khristosov, Shiri Dishon, Imrit Noi, Alex Katsman, Boaz Pokroy
Nanoscale, 38 (2017)

Funnel-Shaped Microstructures for Strong Reversible Adhesion
Sarah C. L. Fischer, Katja Groß, Oscar Torrents Abad, Michael M. Becker, Euiyoung Park, René Hensel, Eduard Arzt
Advanced Materials Interfaces, 4.20 (2017)

Tailoring plasticity of metallic glasses via interfaces in Cu/amorphous CuNb laminates
Zhe Fan, Qiang Li, Jin Li, Sichuang Xue, Haiyan Wang, Xinghang Zhang
Journal of Materials Research, 32.14 (2017): 2680-2689

Magnetic field controlled graphene oxide-based origami with enhanced surface area and mechanical properties
Ok-Kyung Park, Chandra Sekhar Tiwary, Yang Yang, Sanjit Bhowmick, Soumya Vinod, Qingbo Zhang, Vicki L. Colvin, S.A. Syed Asif, Robert Vajtai, Evgeni S. Penev, Boris I. Yakobson, Pulickel M. Ajayan
Nanoscale, 21 (2017)

Synthesis of monodisperse CeO2-ZrO2 particles exhibiting cyclic supereasticity over hundreds of cycles
Zehui Du, Pengcheng Ye, Xiao Mei Zeng, Christopher A. Schuh, Nobumichi Tamura, Xinran Zhou, Chee Lip Gan
Journal of the American Ceramic Society, 100.9 (2017): 4199-4208

Enhancing the Durability and Carrier Selectivity of Perovskite Solar Cells Using a Blend Interlayer
Dong Hun Sin, Sae Byeok Jo, Seung Goo Lee, Hyomin Ko, Min Kim, Hansol Lee, Kilwon Cho
ACS Applied Materials and Interfaces, 9.21 (2017): 18103-18112