EDS, WDS, EBSD, micro-XRF on SEM Sales, training and service support for the countries:
Andorra, Algeria, Austria, Belgium, Germany, Gibraltar, Lichtenstein, Luxembourg, Monaco, Morocco, Netherlands, Portugal, Switzerland, Tunesia
Micro-XRF, TXRF Sales, training and service support for the countries:
Germany, Austria, Switzerland, Lichtenstein, Monaco, Kuwait, Egypt, Morocco, Iraq, Jordan, Qatar
Handheld XRF, LIBS Sales, training and service support for the countries:
Germany, Austria, Switzerland
For registration as well as travelling and accommodation arrangements, please contact:
Bruker Nano GmbH
Am Studio 2D
12489 Berlin, Germany
Phone: +49 30 670990 0
Fax: +49 30 670990-30
By public transport
Starting at the railway station Berlin Ostbahnhof or Berlin Hauptbahnhof please take the S-Bahn S3 (direction Erkner), S5 (direction Strausberg) or S7 (direction Ahrensfelde) to Ostkreuz. At Ostkreuz change to the S-Bahn S9 in direction Flughafen Schönefeld or S8 (direction Grünau/Zeuthen) and descend at Adlershof.
Starting at the railway station Berlin Südkreuz please take the S-Bahn S45 (direction Schönefeld Airport) or S46 (direction Königs-Wusterhausen) and descend at Adlershof.
Starting at Airport Berlin-Schönefeld please take the S-9 in direction Spandau and descend at Adlershof. Alternatively, you can take the bus 164 (direction S Kaulsdorf) leaving directly in front of the EasyJet terminal and disembark at Walter-Nernst-Str. For further directions, see below.
From S Adlershof it is less than a ten-minute walk to Bruker. Walk to the end of the platform (away from the bridge over Rudower Chaussee and descend the stairs. Turn right and then left after the tunnel, cross the tram tracks and keep walking along Ernst-Augustin-Str. At the end of this street turn left into Am Studio. The Bruker building is about 200 meters down the street on the right side. Alternatively you can descend the stairs to Rudower Chausse (at S Adlershof) and take bus 260 to U Rudow and exit at the first stop (Albert-Einstein-Str.). Continue walking in the direction of the bus, the Bruker building is on the right side after about 200 meters.
Starting at Airport Berlin-Tegel please take bus 109 or X9 to the subway station Jakob-Kaiser-Platz and then the subway line U7 to Rudow. At Rudow take the bus 162 (direction S-Adlershof) and descend at the stop Walter-Nernst-Str. Continue walking in the direction of the bus until you reach the intersection with Am Studio. Turn right into Am Studio, the Bruker building is on the right side after approximately 300 meters.
Leaving the Airport Berlin-Tegel drive 800 meters in direction A111. Turn onto the motorway A111 Saatwinkler Damm in direction Zentrum, Dresden, Leipzig, Magdeburg. At the junction Charlottenburg change onto the A100 in direction Zentrum, Wilmersdorf, Spandauer Damm. Stay on the A100 for 17 km. At the junction Neukölln continue on A113 in direction Dresden, Schönefeld, Frankfurt Oder, Treptow. After 5 km take the exit Adlershof. Follow the Ernst-Ruska-Ufer for roughly 2 km. At the traffic light, where the car dealership is on the left hand side, turn left into Am Studio. The Bruker building is on the left after a few hundred meters. Use the driveway to the Bruker building, you will find a few visitor parking spaces on the right side.
After leaving the Airport Berlin-Schönefeld parking lot turn right onto Am Seegraben (B96a). Continue on B96a for roughly 5 km until you reach the intersection with the large orange OBI DIY-store on the corner. At this intersection turn left into Köpenicker Str. Take the next right, which is Am Studio. From here, see above.
Coming from A2, A9, A10, A12 and A13
Arriving from the A2, A9, A10, A12 and A13 at the junction Schönefeld continue in the direction of Berlin Zentrum /Flughafen Schönefeld. Leave A113 at the exit Adlershof. From here - see above (Tegel).