ContourGT X backgroundappimage 4color

Related Literature

Brochures & Datasheets

• ContourGT-X 3D Optical Profiler - Datasheet 1.0 MB
The fully automated, large-sample ContourGT-X 3D Optical Microscope combines unmatched measurement capabilities with highest vertical resolution over the industry’s largest field of view.

ContourGT Objectives Chart 188 kB
Imaging specifications on both standard and high-resolution cameras for Bruker’s Turret Mountable Standard Objective Series and Non- Turret Mountable Objectives, which include long-working-distance (LWD), through-transmissive media (TTM), and low-magnification objectives.

• AcuityXR Enhanced-Resolution Microscopy Technology - Datasheet 1.1 MB
AcuityXR is a revolutionary optical surface profiler measurement capability that combines patented Bruker hardware and software technology to enable select Contour Elite  3D Optical Surface Microscopes to break the optical diffraction limit and deliver lateral resolutions previously considered unattainable with conventional optical microscopy techniques.

Application Notes

• Characterization of CMP Processes with White Light Interferometry  4.1 MB
This application note describes the measurement and analysis advantages that white light interferometry (WLI) offers for the various CMP components. It also details an improvement study that investigated asperity behavior of the fluid layer under the wafer during the CMP process and revealed the effects of polishing and conditioning on the pads, as well as wafer polish results.

• Advantages of Measuring Surface Roughness with White Light Interferometry - AN575 3.6 MB
This application note discusses the use of mean roughness measurements with white light interferometry (WLI) optical profilers. Spatial filters are explained, as well as some of the normative standards requirements from ASME B46.1-2009, ISO 13565-1 and JIS B 0671-1.3 Main technical reasons for WLI selection are covered as well as the advantages and areas of applicability of the full areal measurement standard from ISO 25178-2.

• Performing Comprehensive Wafer Inspection with Non-Contact 3D Optical Profiling - AN559 3.1 MB
This application note discusses how 3D optical profiling provides many advantages over other measurement techniques for non-contact inspection of semiconductor packaging front-end process research and control. These advantages range from fully automated measurements and non-destructive inspection to custom analyses and fast measurement speeds.

• Correlating Advanced 3D Optical Profiling Surface Measurements to Traceable Standards - AN558 2.0 MB
This application note describes the advantages of the non-contact inspection method employed by 3D optical profilers, and discusses the best practices and measurement results for some specialized PTB (Physikalish-Technische Bundesanstalt) traceable roughness standards and other low-cost fingernail roughness gauges.

• VXI Universal Surface Measurements for 3D Optical Microscopes - AN554  2.2 MB
VXI is a breakthrough measurement mode that enables nearly universal measurement results on widely ranging surfaces. This application note briefly reviews the VXI technology and imaging and measurement examples from the LED, MEMS, and display industries.

• 3D Optical Microscopes Provide Key Metrology for Opthalmic Industrial Applications - AN552 2.8 MB
This application note discusses the manufacture and production of various contact lenses and intraocular implantable lenses (IOLs) and how properly deployed metrology, using advanced 3D optical microscopes provide a high return on investment to manufacturers in this space.

• 3D Optical Microscopy for Orthopedic Implants - AN551 1.9 MB
This application note explores the use of 3D optical microscopy in both the R&D and quality control stages of orthopedic implants manufacturing.

• AcuityXR Technology Significantly Enhances Lateral Resolution of White-Light Optical Profilers - AN548 1.4 MB
This application note details Bruker’s development of an interferometric measurement mode, AcuityXR, that effectively overcomes the optical diffraction limit, resolving greater detail in many surfaces without compromising the many other benefits of white light interferometry.

• Optical Profiling Provides 3D Measurement of Blades and Sharps - AN538 1.3 MB
3D surface inspection of blades and sharps can provide valuable information about lifetime and quality of performance to manufacturers.

• Optical Profiling Enables High Volume Stent Manufacturing - AN537 1.3 MB
This application note discusses how optical profiling provides non-contact, 3D measurement of stent shape, defects, and coatings, to enable high-volume production measurement.

• Characterizing Surface Quality - Why Average Roughness is Not Enough - AN511 6.3 MB
In this application note we explore how 3D parameters can be employed to provide great insight into surface finish and performance.

• Comparing 3D Optical Microscopy Techniques for Metrology Applications - AN503 1.6 MB
This application note investigates the principles of operation for white light interferometry (WLI) and confocal microscopy, also known as laser scanning confocal microscopy (LSCM), and discusses their different advantages and disadvantages for metrology.


• 3D Optical Microscopy  548 kB
Novus Light Technologies Today, January 2013 Article discussing the measurement of surface topography using 3D optical microscopes in a variety of industries.