Languages

Virtual Event, Actual Science

Surface Characterization of Thin Films & Coatings Symposium [2021]

Join our team of experts for talks and demonstrations addressing common questions and challenges faced by researchers and exploring Bruker's solutions for complete and effective thin films/coatings characterization.

See How To Characterize Thin Films & Coatings in Real-Time

WELCOME ADDRESS BY MIKE BERG, SALES ACCOUNT MANAGER, BRUKER (JUNE 9, 2021)


In support of innovation and continuous product and process improvement across industries, Bruker offers a variety of complementary techniques for the complete and effective characterization of thin films and coatings.

This on-demand video workshop explores these solutions through a series of expert-led talks and live demonstrations. Each session aims to address common questions and challenges faced by researchers in this field and provide new insight into the characterization methods currently available.

Video Transcript

ON-DEMAND RECORDING | 00:02:30

Good afternoon everybody and welcome to today's virtual workshop on surface characterization of thin films and coatings organized by Bruker Nano Surfaces and Metrology, GE division, in North America. My name is Mike Berg. I'll be your host for today and moderator of these sessions. I'm a Bruker nanoindentation product specialist based with our Minneapolis group. And I am excited to share with you our program.

Today's event is being recorded; everyone who registered will receive a follow-up email with access to the on-demand content, so it'll be easy for you to check back on anything you might have missed or to feel free to forward this to your colleagues, as well. We aim to have this as an interactive event. So you can see already all of our team of application experts joining from our Santa Barbara, Billerica, Massachusetts, and San Jose offices. And at any point during the sessions today, you can submit your questions here in the control panel. After each of the talks, we will have a Q&A session and you'll get a chance to ask our team specific questions. At the end, if there's time, we'll also address any further questions.

Today we're going to be featuring a number of technologies from the Bruker product portfolio, which spans a wide range of characterization tools and complementary techniques ranging from the optical profiler, the AFM, the nanoIR spectrometer, the nanoindentation and nanomechanical instruments, as well as the TriboLab tribometer. These techniques are going to be reflected in our talks, so we will have talks on:

  • Optical profiler measurement of the roughness and waviness of thick films and coatings;
  • The highest resolution AFM modes for the characterization of typography and physical properties of thin films and coatings;
  • For the nanoIR spectrometer, we'll be deconvoluting infrared spectra from stacked films using surface sensitive AFM-IR;
  • For nanomechanical testing, we will be showing depth-sensing nanomechanical characterization of thin films and coatings; and
  • For tribology, we'll be showing how to test coatings' wear and durability performance.

Each of the tests will also have a short demonstration of the equipment

Explore Five Different Methods for Thin Film & Coating Characterization


There are several advanced methods for evaluating the thickness, surface topography, and mechanical, electrical, chemical, and thermal properties of films and coatings at the nanoscale. These include:

  1. Atomic force microscopy (AFM)
  2. Photothermal infrared AFM (AFM-IR)
  3. Nanoindentation
  4. Tribology and mechanical testing
  5. WLI-based optical profilometry


Our speakers are experts in the application of these tools and techniques for the study of thin films and coatings. 

Learn From Our Experts: How to Analyze Your Film & Coating Samples

Thin films and coatings are used for many purposes and in a variety of industries, serving vital functions in various consumer, manufacturing, and medical products. Examples from these market segments could range from micro-electronic components to screen displays, to food packaging or automotive products, and from eyeglass lenses to biomedical implants.

Regardless of the application, the performance and longevity of films and coatings depend on their material, thickness, uniformity, surface roughness, and other properties (including stress, adhesion to substrates). Product and process optimization rely on effectively characterizing these various properties; failure to do so can result in failure modes of the film as well as malfunctions and defects that can lead to substandard performance and lifespan.

These, in turn, can damage your company’s profit margins, professional reputation, and competitive standing.

Get Expert Recommendations

If you have questions about the products or techniques featured in this video, please contact us.

We will be happy to connect you with product and applications experts to discuss your unique needs.

Speakers

Ian Armstrong, Ph.D., North America Application Manager, Bruker

Ian Armstrong is an application manager at Bruker Nano Surfaces and Metrology division and has over 13 years of industrial experience. Formerly he was one of the application team covering AFM and stylus and optical profilometry. Previous to Bruker he obtained a Ph.D. from Swansea University in the UK where his thesis largely involved using AFM.

Senli Guo, Ph.D., Application Scientist, Bruker

Senli earned his Ph.D. in physical chemistry from Duke University (2009) and spent two years in the Center for Nanophase Materials Sciences (CNMS) at Oak Ridge National Lab as a postdoc before joining Bruker as an applications scientist in 2011. All of Senli’s research is about AFM-based methodology developments to address various nanoscience research, ranging from single-molecule interactions to lithium-ion battery electrode properties.

Cassandra Phillips, Ph.D.
Application Scientist, Bruker

Cassandra did her Ph.D. at the University of Toronto exploring the photophysics of boron nitride nanotubes using scattering scanning nearfield optical microscopy (s-SNOM) and computational models. She has been working at Bruker Nano Surfaces and Metrology since September 2019 as an Applications Scientist focusing on nanoscale IR spectro-microscopy and other correlated imaging techniques realized with atomic force microscopy.

Kora Farokhzadeh, Ph.D.
Application Scientist, Bruker

Kora is an application scientist in Bruker’s Tribology, Stylus, and Optical Metrology Group. She got her start in tribology as a graduate student in Materials Engineering, University of Windsor, Ontario, where she focused on dry sliding wear behavior of titanium alloys. She continued that subject into her doctoral studies to investigate surface engineering of titanium alloys for simultaneous wear and fatigue improvements. Later as a post-doc, her work experience can be summarized as surface engineering subjects, including design and fabrication of erosion- and corrosion-resistant cermet thermal spray coatings, wear-resistant polymer composite coatings, and protective coatings for automotive engine applications. Kora’s current role at Bruker lies at the forefront of innovative tribology testing techniques tailored for application, involving wear resistance and friction assessment, screening materials and surfaces by scratch testing and indentation hardness, and analysis of lubricants’ performance for a variety of automotive, biomedical and microelectronics applications. As part of her work, she is an affiliated graduate faculty at Southern Illinois University, collaborating on introducing a new benchtop technique to evaluate the behavior of friction brake materials.

Sandip Basu, Ph.D.
Application Scientist, Bruker

Sandip Basu is an applications scientist at Bruker Nano Surfaces and Metrology division, where he works extensively on nano-mechanical and nano-tribological behavior of coatings and thin films, along with surface texture analysis using white light interferometry and stylus profilometry. He has obtained his Ph.D. in Materials Science and Engineering from Drexel University and has been involved in the industry for more than 10 years developing and promoting applications for nano-scale surface metrology.

Access Event Recordings On-Demand


In this symposium, Bruker experts discuss and demonstrate leading-edge methods for the study of thin films and coatings. Submit the form for instant, full-length access to all video sessions from this event. 

 

Learn how to measure thin film and coating samples with high accuracy and precision.

  • Gain new insight into the advantages, applications, and practical limitations of five different methods of investigation.
  • Understand how to correctly interpret data outputs showing the physical and mechanical properties, surface topography, and thickness of film and coating samples.
  • See how to characterize thin films and coatings using Bruker's ContourX-500, Dimension XR, Anasys nanoIR3, Hysitron TI 980 Nanoindenter, and UMT TriboLab, in real-time.
  • Hear experts answer audience questions about the best and most effective uses of these instruments and methods.

 

Please enter your first name
Please enter your last name
Please enter your e-mail address
Please enter your Company/Institution
What technology are you most interested in?
What best describes your current interest?
Please add me to your email subscription list so I can receive webinar invitations, product announcements and events near me.
Please accept the Terms and Conditions

 

* Please fill out the mandatory fields.

Note: You will be redirected to the recording after form submission.
After a few moments, you should also receive an email at the address provided that contains a link to re-access the viewing page.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.