Cover image GT K banner v2

Related Literature

Brochures & Datasheets

• Contour GT-K 3D Optical Microscope - Datasheet  1.7 MB
The ContourGT-K 3D Optical Microscope sets a new industry standard in design and cost for surface metrology performance.

• ContourGT Objectives Chart - Datasheet  188 kB
Imaging specifications on both standard and high-resolution cameras for Bruker’s Turret Mountable Standard Objective Series and Non- Turret Mountable Objectives, which include long-working-distance (LWD), through-transmissive media (TTM), and low-magnification objectives.

• AcuityXR Enhanced-Resolution Microscopy Technology - Datasheet  1.1 MB
AcuityXR™ is a revolutionary optical surface profiler measurement capability that combines unique, patent-pending, Bruker hardware and software technology to enable select ContourGT® Non-Contact, 3D Optical Surface Profilers to break the optical diffraction limit and deliver lateral resolutions previously considered unattainable with conventional optical microscopy techniques.

Application Notes

• Correlating Advanced 3D Optical Profiling Surface Measurements to Traceable Standards - AN558 2.0 MB
This application note describes the advantages of the non-contact inspection method employed by 3D optical profilers, and discusses the best practices and measurement results for some specialized PTB (Physikalish-Technische Bundesanstalt) traceable roughness standards and other low-cost fingernail roughness gauges.

• 3D Optical Microscopy for Orthopedic Implants - AN551  1.9 MB
This application note discusses Bruker’s 3D optical microscopes' role in both the research and development and quality control stages of orthopedic implants manufacturing.

• Optical Profiling Provides 3D Measurement of Blades and Sharps -AN538  1.3 MB
3D surface inspection of blades and sharps can provide valuable information about lifetime and quality of performance to manufacturers.

• Optical Profiling Enables High Volume Stent Manufacturing - AN537  1.3 MB
This application note discusses how optical profiling provides non-contact, 3D measurement of stent shape, defects, and coatings, to enable high-volume production measurement.

• Characterizing Surface Quality: Why Average Roughness is Not Enough - AN511  6.3 MB
In this application note we explore how 3D parameters can be employed to provide great insight into surface finish and performance.

• Comparing 3D Optical Microscopy Techniques for Metrology Applications - AN503  1.6 MB
This applications note investigates the principle of operation for white light interferometry (WLI) and confocal microscopy, also known as laser scanning confocal microscopy (LSCM) and their different advantages and disadvantages.