The Diff50 high power MR Diffusion probe provides exchangeable single or double tuned frequency ref coils. The Diff50 offers the highest gradient strength available at Bruker for diffusion coefficient measurements down to 5 10-15 m2/s (under specific conditions). The sample can be temperature controlled between -40°C and +80°C, probe body and coils (<= 8mm) are compatible with the Micro5 probe.
Often double tuned rf coils with 2H on the outer coil are selected to allow for locked or TopShim applications. In this configuration, only one nucleus is available for the NMR experiments.
A special version of the Diff50, the Diff50L, has 2 rf coils for NMR investigations plus lock channel. In this configuration the rf coil is not exchangeable anymore, the frequency combination must be defined on initial order of the probe.
Wide Bore Probe, also compatible to SWB magnets
Gradient strength of up to 30 T/m, water cooled
Exchangeable rf (compatible to micro5 except 10 mm coils)
Sample transfer via SB-BST
Variable Temperature Control (compatible to BSVT, BCU,…)
Compatible with WB shim system
Special Diff50L version with two frequencies plus lock, but exchangeable rf coils
|WB / SWB
|1H frequency range
|300 – 800 MHz
|Diffusion / Microscopy Accessory
|Gradient strength per direction
|Rise Time (5-95%), 0-60A,120V
|< 500 µs
|Maximum current tested
|Exchangable rf coils
|single tuned, double tuned
|1H, 2H, 19F, 13C, 31P, 7Li, 19F,…
|Standard sample temperature range (5 mm)
|-40 – 150°C
Bruker’s commitment to provide customers with unparalleled help throughout the buying cycle, from initial inquiry to evaluation, installation, and the lifetime of the instrument is now characterized by the LabScape service concept.
LabScape Maintenance Agreements, On-Site On-Demand and Enhance Your Lab are designed to offer a new approach to maintenance and service for the modern laboratory