Tips and Tricks for Making Your Own Secondary Standards for XRF

Tips and Tricks for Making Your Own Secondary Standards for XRF

Join us for a joint Bruker-FLUXANA Webinar
This webinar took place on July 28th 2020

Register to download slides & media

Additional Documents


Although the standardless analysis methods on a modern XRF spectrometer can produce results with a very high degree of accuracy, this is not always the case. Certain assumptions have to be made about the sample to get the best results out of FP-based methods and, often, measurements are longer than they would otherwise be for a dedicated calibration. For a dedicated calibration, matrix-matched calibration standards are required, however. So what do you do when there are no (or only very few) CRMs available for the material you wish to analyse?

During this 60-minute educational webinar, experts from FLUXANA and Bruker AXS will present some strategies for getting around this problem using wide oxide calibrations to create your own secondary standards, to then allow rapid screening and product quality control.

The webinar will conclude with a Q&A session – your chance to put your questions to our panel.

Register Now!

If you are unable to attend the webinar, please feel free to register anyway, and we will send you a link to the recording to watch at your convenience.

We look forward to seeing you there!


Colin Slater
Research & Development, Bruker AXS GmbH
Rainer Schramm