▶ Watch On-Demand | 50 Minutes

On-Demand Session: Advanced In‑Situ SEM Nanomechanical Characterization with the PI 89 SEM PicoIndenter

See how advanced methods for SEM-based nanomechanical characterization can reveal novel insights about material behavior.

Watch Now | 15 Minutes

Simultaneous High Temperature and High Strain Rate Nanoindentation of Structural Materials

Aby odtworzyć ten film, musisz zaakceptować pliki cookies.

Presented by Kevin Schmalbach, Ph.D., Staff Scientist, Nanoindentation Unit, Bruker (May 19, 2026)

_{PRESENTATION HIGHLIGHTS:}

[00:00:00] Real-world motivations and measurement methodologies
[00:04:57] High strain rate nanoindentation methods
[00:07:41] Approaches for calculating properties from nanoindentation test results
[00:09:12] Testing on fused quartz
[00:11:03] Testing on tungsten
[00:12:26] Calculating and interpreting results
[00:16:20] Conclusions

Watch Now | 30 Minutes

Aby odtworzyć ten film, musisz zaakceptować pliki cookies.

Presented by Amit Misra, Ph.D., Materials Science & Engineering, University of Michigan (May 19, 2026)

_{PRESENTATION HIGHLIGHTS:}

[00:00:30] Nanomechanical testing research history, methods, and challenges
[00:04:30] Example 1: Testing of hierarchical metallic microstructures (Fe–Cu composites)
◦ [00:08:05] Direct-pull tensile test challenges
◦ [00:09:00] Overcoming challenges via in-situ SEM testing with PI 89
[00:16:00] Example 2: Low strength and ductility in As-case Al-Si
[00:20:15] Case Study: Mo–Cu nanolaminates vs hierarchical morphologies
[00:27:29] Summary