▶ Watch On-Demand | 50 Minutes

On-Demand Session: Advanced In‑Situ SEM Nanomechanical Characterization with the PI 89 SEM PicoIndenter

See how advanced methods for SEM-based nanomechanical characterization can reveal novel insights about material behavior.

Watch Now | 15 Minutes

Simultaneous High Temperature and High Strain Rate Nanoindentation of Structural Materials

このビデオを再生するには Cookie を受け入れる必要があります

Presented by Kevin Schmalbach, Ph.D., Staff Scientist, Nanoindentation Unit, Bruker (May 19, 2026)

_{PRESENTATION HIGHLIGHTS:}

[00:00:00] Real-world motivations and measurement methodologies
[00:04:57] High strain rate nanoindentation methods
[00:07:41] Approaches for calculating properties from nanoindentation test results
[00:09:12] Testing on fused quartz
[00:11:03] Testing on tungsten
[00:12:26] Calculating and interpreting results
[00:16:20] Conclusions

Watch Now | 30 Minutes

このビデオを再生するには Cookie を受け入れる必要があります

Presented by Amit Misra, Ph.D., Materials Science & Engineering, University of Michigan (May 19, 2026)

_{PRESENTATION HIGHLIGHTS:}

[00:00:30] Nanomechanical testing research history, methods, and challenges
[00:04:30] Example 1: Testing of hierarchical metallic microstructures (Fe–Cu composites)
◦ [00:08:05] Direct-pull tensile test challenges
◦ [00:09:00] Overcoming challenges via in-situ SEM testing with PI 89
[00:16:00] Example 2: Low strength and ductility in As-case Al-Si
[00:20:15] Case Study: Mo–Cu nanolaminates vs hierarchical morphologies
[00:27:29] Summary