Bruker Nano Analytics presents:

Quantification of Steels and Alloys Using a Dual Source Multidetector System - Part I: XRF-EDS and SEM-EDS Analysis

On-Demand Session - 46 Minutes

Combined Electron and X-ray Excitation for Composition Analysis

Quantification of steels and alloys can be problematic due to the various elements of interest and the range of concentrations present from majors through to traces. This two-part webinar will show the benefits of using a dual-beam system, that is, a system that has both an electron and micro-XRF source. In addition, this system is equipped with an energy dispersive spectrometer (EDS) and a wavelength dispersive spectrometer (WDS). Part I of this webinar series will focus on the dual-beam sources, and how they interact with the samples of interest to generate X-rays which are identified and quantified using EDS.  Part II will then compare these results with the measurements using the WDS collected on the same system. The samples used for this webinar are a range of steels with variable concentrations of Cr and Ni, expected for those used in industry, as well as quantifying minor and trace elements, like Co, Cu, Mn, Mo, Nb, S, and Si. In addition, results for high iron (> 95% Fe) alloys will also be presented. The results demonstrate the capabilities and benefits of using a dual source multi detector system.  

The webinar will be rounded off by a 15-minute Q&A session where our experts will answer your questions.

SEM with various micro-XRF source attached (right) with EDS (left), WDS (back) and FQ-EDS (bottom right)
Elemental intensity map of Fe and Co in various certified steels.

Who should attend?

  • Everyone dealing with an application where quantification is required
  • Researchers from industry and academia who investigate steels or alloys

Speakers

Stephan Boehm

Product Manager micro-XRF on SEM and WDS, Bruker Nano Analytics

Dr. Andrew Menzies

Senior Application Scientist - Geology and Mining, Bruker Nano Analytics

Dr. Michael Abratis

Sr. Application Scientist, Bruker Nano Analytics

Watch this Webinar On-Demand

Please enter your details below to gain on-demand access to this webinar. 

Input value is invalid.

* Please fill out the mandatory fields.

Please enter your first name
Please enter your first name
Please enter your e-mail address
Please enter your first company / institution
What best describes my current situation:

By submitting my data, I give consent to the collection, processing and use of my personal data in accordance with the Privacy Policy and the Terms and Conditions of Bruker.

* Please fill out the mandatory fields.

Thank you. Enjoy your On-Demand Webinar

 

Thank you for signing up to watch our on-demand webinar Quantification of Steels and Alloys Using a Dual Source Multidetector System - XRF-EDS and SEM-EDS Analysis. We have also sent an email to your registered address containing the link to watch the webinar. 

If you have questions about the content of the webinar or about any of our other products and services, please contact us at info.bna@bruker.com.

You can also contact our regional offices by email at: 

Europe, Middle East and Africa: support.bna.emea@bruker.com
Asia-Pacific: support.bna.apac@bruker.com
Americas: support.bna.americas@bruker.com