The VÅNTEC-500 detector is the core technology for the next generation of 2D XRD systems by combining the best features of classic X-ray film and electronic single X-ray photon detection. Its huge detector area of more than 15,000 mm² grabs as much 2-D information as classic film cameras in just a few seconds. Superb counting statistics is achieved by “seeing” and counting individual photons in real time. Thanks to the proprietary MIKROGAP™ technology the VÅNTEC-500 can be operated at high count rates while operating virtually noise free. The only source of background is cosmic rays and the material’s natural radioactivity, which accounts to less than 5 cps over the whole detector area. Hence, it is well-suited for the analysis of both weakly and strongly scattering samples.
The MIKROGAP design results in a very stable detector which is maintenance free, insensitive to mechanical shock or movement, and can withstand intensive and high energy radiation without damage. Thanks to extensive experience and in-house detector development, the VÅNTEC-500 is guaranteed to be exemplary and without any defective detector areas.
In a MIKROGAP detector, the grid, the anode, the delay lines and the Xe-CO 2 gas mixture are contained in a sealed vessel with a beryllium entrance window. In the conversion region, the incoming X-ray photons produce primary electrons by gas ionization. These electrons drift towards the anode under a high electric field. The number of electrons is multiplied in the amplification gap. This signal amplification is by far larger than any solid-state detector provides thus very weak signals can be detected. The location of each X-ray photon is determined by readout strips through the X and Y delay lines. The key feature of the MIKROGAP technology is the presence of a resistive anode to allow a very thin amplification gap, which greatly improves the local count rate.
For a 2D detector, size is the most important feature. A large detector window not only enables increased data collection speed, it also provides information that is simply not accessible with 0-D, 1-D or smaller 2-D detectors. The VÅNTEC-500 detector features a huge 140mm diameter window, covering up to about 80° (2θ) and a large γ-range. The flexible positioning of the detector along the track allows for a wide range of sample-to-detector distances to optimize angular coverage and resolution for various applications. This allows you to:
The successful application of the 2D XRD method requires an intelligent and integrated approach, both on the hardware and software level.
The DIFFRAC.SUITE software provides the optimum measurement strategy. It proposes the best settings for optimized data collection in different geometries. The Debye view allows you to identify Debye rings with similar properties in terms of spottiness and texture, for example. Only the Debye rings with identical charac-teristics can belong to the same crystalline phase. Use our unique SEARCH/MATCH function to identify the crystalline phases. Other software capabilities include:
The hardware integration of the VANTEC-500 reflects the DAVINCI design principal completely.
DAVINCI.SNAP-LOCK – changing components without tools
|Photon-counting, Xe-based MIKROGAP™ detector (US Patent 6,340,819 )||
Highest overall performance of any gas-filled XRD detector
140 mm diameter
|Shows scattering not visible on smaller detectors
Very fast detection time
Number of pixels
2048 x 2048 (68 µm),
1024 x 1024 (136 µm),
512 x 512 (272 µm)
|Higher resolution to clearly show closely spaced scattering or diffraction features|
|2Ɵ coverage and difference sample distances||10 cm - 56°,
15 cm - 42°,
20 cm - 33°,
25 cm - 27°,
30 cm - 23°
|Optimize sample to detector distance for coverage and angular resolution|
3-15 KeV (Cr, Fe, Co and Cu radiation)
|Compatible with most XRD wavelengths for experimental flexibility|
|Background||< 5 cps per whole area (< 0.0005 cps/mm²)||Sensitive to weakly scattering samples|
|Radiation Hardness||10₁₂ X-ray photons/mm² (10₁₆ photons in total)||Ease of use|
|Maintenance||not required||Ease of use and low cost of ownership|
Check out our support website for: