Microscopy images with resolutions < 10 x 10 x 10 μm3 samples in a Bruker standard bore magnet. But the probe can also be used in wide bore and super wide bore systems. Combined with it‘s versatile exchangeable rf coils it can be adapted to perfectly match your application, supporting sample diameters from 0.5 -10 mm.
The Micro5 probe can also be used as a 3-axis diffusion probe or combined to increase the gradient strength in one direction. It is particularly useful to investigate anisotropic diffusion.
Micro5 | |
Bore | SB / WB / SWB |
1H frequency range | 300 – 950 MHz |
rf channels | Two independent |
Requirements | MR Microscopy Accessory |
Gradient | Micro5 |
Directions | xyz |
Gradient strength per direction | 3 T/m |
ID/OD | 19/40 mm |
Rise Time (5-95%), 0-60A,120V | < 80 µs |
Cooling | Water |
Maximum current tested | 60 A |
Removable | Yes |
Exchangable rf coil | |
Detection | single tuned, double tuned |
Typical Nuclei | 1H, 2H, 19F, 13C, 31P, 7Li, 19F, … |
Standard sample temperature range (5 mm) | -40°C.. +80°C |
Sample diameter | 0.5 – 10 mm |
The Micro5 probe is typically used to study mineral or geologic samples, polymers, tablet dissolution kinetics, plants and seeds, bone or tissue biopsy samples, and small insects.
Rf coils are exchangeable, the gradient coil must be unmounted first to allow the change of the rf coil.
Bruker’s commitment to provide customers with unparalleled help throughout the buying cycle, from initial inquiry to evaluation, installation, and the lifetime of the instrument is now characterized by the LabScape service concept.
LabScape Maintenance Agreements, On-Site On-Demand and Enhance Your Lab are designed to offer a new approach to maintenance and service for the modern laboratory
MR microscopy & MR diffusion applications team: micdiff@bruker.com