S2 POLAR banner

S2 POLAR – 석유화학 산업용 XRF

S2 POLAR는 석유화학 산업용 EDXRF(에너지분산형 X선 형광분석기)입니다.

S2 POLAR는 디젤에서 원유에 이르기까지 황 분석에 따르는 모든 요건을 완벽하게 충족합니다. 여기에는 최종 제품에 대한 규정 준수 ULS(Ultra-Low Sulfur, 초저황) 분석뿐 아니라, 정유소의 황 농도에 대한 지속적인 공정 관리도 포함됩니다.

S2 POLAR는 ASTM D7220, D4294, ISO 13032 등 황 분석을 위한 국제표준을 준수합니다.

부식 방지를 위한 CI 측정, 잔류물 축적 방지를 위한 P 측정 등, 여러 원소를 동시에 측정할 수 있는 기능을 지원하는 S2 POLAR는 하나의 기기로 정유소의 분석 요건을 충족하기에 적합합니다.

아울러 ASTM D6481 및 ASTM D7751에 따라 Mg, P, S, Cl, Ca, Zn, Mo 등의 원소를 함유하는 윤활유 첨가물에 대해 국제 표준 기반 분석에도 적합합니다. 식용유 성분 원소(Mg, P, Ca 등) 또는 팜유 성분 원소 분석 역시 가능합니다.

S2 POLAR with user

SampleCare™를 이용한 액체 시료의 안전한 처리

최대 장비 가동 시간은 운영에 있어 매우 중요한 요소입니다. Bruker의 SampleCare 기술은 최대 장비 가동 시간을 보장합니다. SampleCareTM는 액체 시료의 누출을 방지하며 중요한 시스템 구성요소를 보호합니다. 이를 통해 최고의 기기 가용성이 보장됩니다.


S2 POLAR application oil refinery

디젤 및 가솔린의 ULS(Ultra-Low Sulfur) 수준 분석부터 원유의 황 농도 분석에 이르기까지 ASTM D7220, D4294, ISO 13032 등의 국제 표준에 따라 황 분석을 수행할 수 있습니다.

여러 원소를 측정할 수 있는 기능을 지원하는 S2 POLAR는 부식 영향의 최소화를 의한 Cl 측정, 잔류물 축적 방지를 위한 P 측정 및 정유 공정의 촉매 원소 모니터링에도 적합합니다.

More information on refineries


S2 POLAR application oil changing

ASTM D6481 및 D7751에 따라 윤활유 첨가물에 대한 다중 원소 분석을 지원합니다(Mg, P, S, Cl, Ca, Zn, Mo 등). 또한 S2 POLAR는 식용유 성분 원소(Mg, P, Ca 등)나 팜유 성분 원소 분석에도 적합합니다.

More information on oils

S2 POLAR Refinery Analyzer


ApplicationsElemental analysis in refineries e.g. sulfur analysis of
  • gasoline, diesel
  • biodiesel
  • kerosene, jet fuel, heating oil
  • naphtha, residual oil to crude
Further elements on request (e. g. P, Cl, Fe, Ni, V)
All refinery applications on one unit
NormsASTM D7220-17: Sulfur in automotive, heating, and jet fuels from 3 ppm to 942 ppm
ASTM D4294-16: Sulfur in petroleum and petroleum products from 16 ppm to 5 %
Ready-to-analyze solutions* for ASTM D7220 and D4294 including blanks, set of standards, QC and DC samples
Fulfills ISO 13032, 20847, 8754, IP 336, 496, 532,
and JIS K 2541-4

Norm-compliant sulfur analysis, internationally accepted, including ultra-low sulfur (ULS) applications


Dedicated, optional pre-installed push button methods to fit for purpose

Detection Limit (LLD)0.7 ppm S at 300 s measurement timePrecise and accurate S measurements, including ultra-low sulfur (ULS). Enables thesh-hold relevant process control at all steps in refineries
Measurement Range3 ppm to 5 % S, combined in one calibration with automated line switch
Higher concentrations on request
One calibration with wide concentration range


S2 POLAR Oil Analyzer


ApplicationsElemental analysis of additives in oils and polymersElemental analysis optimized for petrochemical products
NormsASTM D6481-14: P, S, Ca, Zn,
ASTM D7751-16: Mg, P, S, Cl, Ca, Zn, Mo
Ready-to-analyze solutions* for ASTM D6481 and D7751 including blanks,
set of standards, QC and DC samples
Further elements and norms on request

Norm-compliant analysis, internationally accepted

Dedicated, optional pre-installed push button methods to fit for purpose


S2 POLAR Refinery & Oil Analyzer


Atmosphere Modes
Helium mode
Vacuum mode
Optimal light element analysis of liquids
Low cost of operation
Sample Preparation
Liquid cups, SampleCare cups, Prolene and Mylar® foils, pipettes, balanceAccessories ensure high throughput of liquid samples. Low-cost per sample due to standardized liquid cups
Further Options

Emergency Machine Off (EMO)
Uninterruptible Power Supply (UPS)
Sample rotation


Compliant with safety requirements
Enables removing of liquid samples
Enhanced precision for inhomogenous samples, such as polymer pucks
X-ray Tube
50 W, high-power X-ray tube, max. voltage 50 kV, with polarizing HighSense™ beam path

Optionally: 30 kV max.
Max. power for short measurement times and high sample throughput, beam path optimized for petrochemical materials
Simplify regulatory efforts (e.g. Austria, France, Italy, Taiwan)
DetectorHighSense™ ULS Silicon Drift DetectorHighest count rates for fast analysis, low LLD
TouchControl™Integrated 12.1‘‘ TFT touchscreen, multilingual user interface: English, German, French, Spanish, Portuguese, Italian, Russian, Chinese, JapaneseIslandMode™ without external PC
Intuitive and easy-to-use, in your own language
ConnectivityEthernet port RJ45, 3x USB ports for mouse, keyboard, and printer; HDMI/VGA ports for external display, remote access via TCP/IPIslandMode™ but not isolated, various options for printing and network data transfer, even fully remotely
Power Supply100-240 V, 50/60 Hz, max. 600 VAStandard wall plug
Dimensions; width x depth x height, weight46.6 x 74.5 x 37.0 cm, 55 kg
18.3’’ x 29.3’’ x 14.6’’, 121 lbs
Small and compact for installations with limited space, e.g. for on-site process control in refineries

DIN EN ISO 9001:2008, 2006/42/EC (CE-certified Machinery directive), 2014/35/EC (Electrical equipment), 2014/30/EC (Electromagnetic Compatibility),
German Type Approval and Vollschutz according to BfS RöV,
Fully radiation-protected system; radiation <1 μSv/h (H*), Compliant to ICRP, IAEA, EURATOM

* Optional packages
Mylar® is a trademark of DuPont Nemours Inc.
HighSense™, IslandMode™, SampleCare™, TouchControl™ are trademarks of Bruker AXS.

Available services include

  • Help desk support from highly-skilled troubleshooting professionals, to isolate and resolve hard- and software problems
  • Web-based remote instrument service for service diagnosis and applications support
  • Planned maintenance, according to your requirement
  • Customer on-site repair and maintenance service
  • Spare parts availability typically over night or within a few working days worldwide
  • Compliance services for installation qualification, operational qualification / performance verification
  • Site planning and relocation

Bruker Support

On our support website you will find:

  • Software Updates
    System software updates are available online to registered users.

  • Documentation
    Product manuals and installation guides are available online to registered users.
  • All