D2 PHASER

Superior data quality meets
unparalleled ease-of-use

The D2 PHASER delivers data quality and collection speed that, up to recently, was thought impossible with a benchtop XRD system.

Due to its compact size, low weight, and ease-of-use design, the system is conveniently mobile, without the need for complicated infrastructure, large, heavy-load work benches, or vendor installation and alignment. A standard power outlet and a few minutes are all that is required to take they system from fully packaged to outstanding results.

The full-featured, and no compromise DIFFRAC.SUITE software package provides the easiest measurement method creation and most powerful and accurate analysis results. All covered with 21CFR Part11 compliance, if required.

XRD for everyone

XRD - now even better:
The D2 PHASER XE-T Edition

Now available with the state-of-the-art, energy dispersive LYNXEYE XE-T detector which is capable of delivering data quality not possible with any other benchtop XRD system on the market:

Virtual elimination of background from sample fluorescence and Bremsstrahlung scattering
Significantly improved peak to background boosting lower limits of detectionand quantification
Clean diffraction line profile shapes without metal filter artefacts to improve peak fitting results and accuracy in quantitative phase analysis

XRD for everywhere

XRD for everything

Cement

D2 PHASER Application Reports for Download

In close partnership with the cement industry Bruker is continuously pushing the performance of its analytical solutions.

Silica Dust Analysis (PDF Application Report)

-> This report demonstrates its use for monitoring occupational exposure to respirable silica.

Quantitative phase analysis of OPC Clinkers (PDF Application Report)

-> This report demonstrates its use for the phase quantification of Ordinary Portland Cement Clinkers.

Minerals & Mining

D2 PHASER Application Reports for Download

Bruker offers advanced solutions to reliably support geologists and mining prospectors on locating and analyzing deposits anytime and anywhere.

Phase Identification of Geological Material (PDF Application Report)

-> This report demonstrates its use for fast and reliable phase identification.

Quantitative phase analysis of Gypsum/Anhydrite samples (PDF Application Report)

-> This report demonstrates its use for the determination of the different sulphate phases in natural Gypsum or Anhydrite.

Silica Dust Analysis (PDF Application Report)

-> This report demonstrates its use for monitoring occupational exposure to respirable silica.

Material Properties

D2 PHASER Application Reports for Download

The D2 PHASER is a portable desktop XRD instrument for research and quality control. It is for instance possible to investigate crystal structures applying the fundamental parameters approach in the TOPAS software, nano-structures for fast and reliable SAXS measurements, or micro-structures (crystallite size).

SAXS-Analysis of the Mesoscopic Catalyst SBA-15 (PDF Application Report)

-> This report demonstrates its use for fast and reliable SAXS measurements of material exhibiting large d-spacings up to about 10 nm.

Crystal Structure of Er-Melilite (PDF Application Report)

-> This report demonstrates its use for investigating crystal structures applying the fundamental parameters approach in the TOPAS software.

Anode Coke (Lc Value) Analysis (PDF Application Report)

-> This report demonstrates its use for quick and reliable crystallite size determination.

DIFFRAC.DQUANT: Norm compliant quantification of retained austenite (PDF Application Report)

-> The Ratio Method implemented in DIFFRAC.DQUANT and precise intensities measured with the D2 PHASER benchtop diffractometer allow the accurate determination of retained austenite levels in steel.

Oil & Gas

D2 PHASER Lab Reports for Download

The D2 PHASER is a mobile benchtop X-ray diffractometer (XRD) used in the identification of both bulk and clay minerals within geological samples. Moreover, X-ray diffraction (XRD) is an essential technique in the analysis of shale rock formations, allowing for qualitative and quantitative mineralogical characterization.

X-ray Diffraction in the Petrochemical Industry: Identification of Swelling Clays with the D2 PHASER (PDF Lab Report)
-> In this report, we describe the analysis of clay samples using oriented mounts.

X-ray Diffraction in the Petrochemical Industry: Wellsite Mineralogical Analysis of Shale Formations with the D2 PHASER (PDF Lab Report)
-> In this lab report, we discuss the mineralogical analysis of drill cuttings from shale rock using the D2 PHASER mobile X-ray diffractometer.

Available services include

Help desk support from highly-skilled troubleshooting professionals, to isolate and resolve hard- and software problems
Web-based remote instrument service for service diagnosis and applications support
Planned maintenance, according to your requirement
Customer on-site repair and maintenance service
Spare parts availability typically over night or within a few working days worldwide
Compliance services for installation qualification, operational qualification / performance verification
Site planning and relocation

Bruker Support

On our support website you will find:

Software Updates
System software updates are available online to registered users.
Documentation
Product manuals and installation guides are available online to registered users.